Search published articles


Showing 2 results for Sanandaj

Esmael Ghahremani, Afshin Maleki, Somayeh Ghafouri, Nasrin Feyzi, Shahram Sadeghi,
Volume 2, Issue 2 (10-2014)
Abstract

Background & Objective: Cattle Slaughterhouses are one of the main centers of wastewater producing facilities with high pollution load, which in the absence of proper treatment can cause a lot of environmental pollution. The aim of this study was to determine the effectiveness of Industrial slaughterhouse wastewater treatment plant in the city of Sanandaj in 2012. Method: This is a cross-sectional study which was conducted in the laboratory of faculty of health, university of medical sciences in Sanandaj in the year 2012 for three months. Weekly tests of chemical oxygen demand (COD), biochemical oxygen demand (BOD) and total suspended solids (TSS) and in total 24 times sampling of input and output for the treatment plant was performed instantly. The experiments were based on the latest proposed method in the book of standard method (the Examination of Water and Wastewater) and at the end, Microsoft EXCEL software was used for data analysis. Results: The average COD, BOD and TSS entering the plant were 2036.69 ± 61, 1216.5 ± 220 and 791.12 ± 147 milligrams per liter and their average output from the plant were 747.71 ± 17, 517.5 ± 8 and 306.51 ± 8 milligrams per liter and the total average of removal efficiency for each of these parameters were 63.29 ± 3 percent, 57.45 ± 2 percent and 61.25 ± 5 percentage respectively. Conclusion: The quality of output effluent from treatment plant of cattle slaughterhouse in Sanandaj, in almost all months was not according to effluent disposal standards and generally, the efficiency of this treatment plant is not desirable in removal of contaminants. Therefore, its efficiency should be improved by using appropriate methods.
Borhan Mansouri, Namamali Azadi, Yazdan Habibi,
Volume 3, Issue 2 (10-2015)
Abstract

Background and Objective: The industrial development along with the rising in human population has led to releasing considerable hazardous materials such as heavy metals into the environment. Environmental pollution by heavy metals can in turn threaten the human health. Therefore, the aim of this study was to assess the concentration levels of some heavy metals including; Cd, Pb, Cr and Cu, as well as to estimate the physico-chemical parameters of drinking water distribution network of Sanandaj city in 2014.

Methods: In order to accomplish the present descriptive study, 18 samples were collected from the water distribution network of Sanandaj during 2014. The level of heavy metals were assayed by using a graphite furnace atomic absorption (Phoenix 986). The standard approaches mentioned in the standard method book were used to measure the fluoride, nitrate and hardness of water. The Pearson Correlation test was used to estimate the association between parameters.

Results: The mean concentrations of Cd, Pb, Cr and Cu were found to be 0.0004, 0.011, 0.03, 0.3 mg/L respectively. Moreover, the mean levels of fluoride, nitrate, and total hardness were 0.11, 6.57, and 166 mg/L respectively. The level of Hazard Quotient in this study was lower than 1 (HQ < 1).

Conclusion: The concentration of all heavy metals in this study were lower than the national and international thresholds of drinking water. It is concluded that Sanandaj drinking water is safe to drink concerning health issues.  



Page 1 from 1     

© 2025 CC BY-NC 4.0 | Jorjani Biomedicine Journal

Designed & Developed by : Yektaweb